Prismatic Duct Type Silencer
Prismatic Duct Type Silencer is designed to reduce the noise generated in air conditioning and ventilation systems. A1 class fireproof material is used in accordance with TS EN 13501-1 standard. The rock wool, air contact surfaces of the silencer are coated with glass fiber against particle abrasion that may occur at an air speed of 20 m/s, thus increasing the durability of the material. The silencer towers are fixed and can be easily mounted to the duct flanges thanks to its standard self-flanged structure. The 30 mm structure on the corner pieces makes installation even easier. Customers are advised to contact the company for special dimensions, so that a suitable solution can be offered according to specific requirements.
General Features
- X Designed to prevent noise generated in air conditioning and ventilation systems.
- X A1 class non-combustible material in accordance with TS EN 13501-1 is used.
- X The surfaces of stone wool in contact with air shall be covered with glass fiber against particle abrasion up to an air velocity of 20 m/s.
- X The silencer lobbies will be fixed.
- X The standard self-flange will be produced in 30 mm on corner pieces that allow easy mounting on duct flanges.
- X Please contact our company for selection in the sizes you want.
Material
- STANDARD:
- X Frame Galvanized
- X Backstage Galvanized
- X Backstage Filling: Rock Wool 50 kg/m3
- OPTIONAL X
- X Case Stainless
- X Backstage Stainless
- X Backstage Filling: Rock Wool 50 kg/m3